JL/JE Series Manual/Electric High Lift Trucks

Introduction of high lift truck

High lift truck is a new design with larger piston to offer you real 1000kg and 1500kg capacity. This series JL are manual high lift pallet jack and JE are electric high lift truck. It is very suitable as gekombineerde handpalletwa en hysbak. Met die ergonomiese warm handvatsel is dit baie eenvoudig en gemaklik om te gebruik. Boonop word voorste steunpote en verstelbare stabiliseerders outomaties na die vloer verleng met die oplig van die vurk, wat die maksimum stabiliteit en optimale rem kan verseker. Dit kan dieselfde snelheid hou ongeag die vragmotor met of sonder vrag.

This high lift pallet trucks can lift the pallets loading or unloading to the height you need. they can be used in various applications like factory, workshop, warehouse etc.

The manual high lift pallet truck has model: JL5210, JL6810, JL5215, JL6815;

The electric high lift pallet truck has model: JE5210, JE6810, JE5215, JE6815

             Manual high lift pallet truck JL series

We have this item in stock in France, if you are located in Europe, we can arrange delivery to you ASAP! This way will save your time and shipping cost.

Specifications of manual high lift skid jack truck:

Electric high lift pallet truck JE series

 

• High quality oil cylinder: The integrally sealed hydraulic cylinder can effectively avoid the disadvantages of oil leakage, improve the safety performance of the whole vehicle, lift quickly and improve work efficiency.
• Comfortable handle: Ergonomic design, the outer layer is rubberized and non-slip, the operation feels comfortable, and the drop speed of the hand-pulled pressure relief heavy cargo is controllable, which improves the operation safety.
• Exquisite workmanship: The surface of the car body has been subjected to high temperature baking paint, electrostatic spraying, the surface is smooth and smooth, durable, beautiful and corrosion-resistant.
• Anti-pinch scissors: The scissors are designed with increased spacing and anti-clamping to prevent accidental clamping of other items. Thickened steel enhances the bearing capacity, making it safer and more durable.

• Uiters maklik om hierdie eenheid te pomp en lig baie geskik as 'n gekombineerde handpalletwa en heftafel te maak
• Outomatiese afdraai-snelheidsbeheer met 'n unieke hidrouliese klep; die beslissingsnelheid hou altyd dieselfde ongeag die vragmotor met of sonder vrag. Dit sal verhoed dat vragskade vinnig daal.
• Swaardiens-ontwerp: 4 mm-vurkraam van staalplaat en groter hyspon verseker dat die vragmotor die nominale kapasiteit bereik.
• Baie geskik as 'n gekombineerde handpalletwa en heftafel
• Voorste steunpote en verstelbare stabiliseerders word outomaties na die vloer verleng wanneer die vurke 'n hoogte van 420 mm bereik, om maksimum stabiliteit en optimale rem te verseker.
• Voldoen aan EN1757-4.

Aandag en onderhoud:

Moenie oorlaai nie;
Of toegelaat word dat die grondtoestande gebruik word;
Laai die goed korrek;
Dra veiligheidskoene en handskoene tydens hantering;
Voer 'n deeglike operasionele ondersoek voor elke gebruik uit;
Die masjien te monteer met die regte opheffingstegniek;
Don't overlook the potential dangers that may exist during operation.

Proper maintenance will extend the life of the truck.
Check the oil, remove air and lubricate during maintenance.
Check the oil level every six months.
The newly injected oil to the rubber container should be 5mm below the liquid level, and the fork must be at the lowest position when adding oil.
When replacing the seal, air may enter the hydraulic system, place the joystick in the LOWER position, and then swing the handle a dozen times.
Lubricate the movable part with motor oil or oil.
Also pay attention to daily inspection and maintenance.
Inspection of the truck can reduce wear as much as possible.
Special attention should be paid to the wheel, axle, handle, fork, lift and lowering control.
Whenever work is completed, the fork should be unloaded and lowered to the lowest position.